2 of 4 lenses cut 

Taken: Apr 30, 2012

Opening trim back on .. Needs lenses and frown 

Taken: Apr 30, 2012

Vocoder filled with hot glue - and then glued on with e- 6000 and screwed in through pre existing holes ...aerator Hovi mics back on and wired 

Taken: Apr 30, 2012

Needs frown screen and lenses shaped and installed 

Taken: Apr 30, 2012

Left side of cap is glued on high and the whole cap is twisted to right about nearly half an inch So its all best i could do Sides of the brow are centered l& r but off from the grey sides since cap is off And the left rear greay is even l 

Taken: Apr 30, 2012

Sticker kit on 

Taken: Apr 30, 2012

Sticker kit on 

Taken: Apr 30, 2012

Cleared and fixed -- brow on 

Taken: Apr 30, 2012

Taken: Apr 30, 2012

Scuffed next avrylic in them. Then smoke on the white and clear it paint is done 

Taken: Apr 30, 2012

Taken: Apr 30, 2012

Scuffing next some acrylic in the gashes .. Then some smoke on the white and clear !! 

Taken: Apr 30, 2012

Taken: Apr 30, 2012

Taken: Apr 30, 2012

Brand new rebuilt and painted fx mic tips aerators .. New 8 ohm mini speakers .. Sound much improved and look 10 times better ;) 

Taken: Apr 30, 2012

Needs a touch up .. And when drier i need to rub off the spots on the nose stipe fine the lines - remove the pencil marks ...( maybe wet sand ?? ). 

Taken: Apr 30, 2012

Taken: Apr 30, 2012

Taken: Apr 30, 2012

Taken: Apr 30, 2012

I sadly foresee many an issue with this face piece. Will defiantly need to wet sand .. And maybe wether the red ? Maybe not may just soot it up before the clear ?? 

Taken: Apr 30, 2012

Taken: Apr 30, 2012

Taken: Apr 30, 2012

Lenses ;) 

Taken: Apr 30, 2012

Speakees 

Taken: Apr 30, 2012